Friday, July 3, 2020

In The News

Alvin Products News

25

Foundries / Metalcasting:

  • Lab-metal reduces costly rejects in foundry production.
  • Fill aluminum casting porosity spots with Lab-metal.
  • Repair gouged or worn core boxes with Hi-Temp Lab-metal.
  • Patch dents and rough spots on metal castings (aluminum & iron) with Lab-metal.
  • Fill blow holes, sand holes and metal surface defects with Lab-metal.
  • Repair or alter wood and metal patterns with Lab-metal.
  • Thin Lab-metal with Lab-solvent and brush or spray onto patterns to prevent warping and checking.
  • Brush or spray Lab-metal onto castings for a smooth, metallic finish prior to painting.
  • Lab-metal and Hi-Temp Lab-metal are used to fill seams or dents prior to powder coating.
  • Lab-metal is used to coat wood patterns for 300% higher abrasion resistance.
  • Lab-metal is paintable, rustproof, and water-resistant.
  • Lab-metal may be pigmented to darker shades of gray to match gray iron.

Welding:

  • Lab-metal cosmetically repairs damaged metal where welding is impractical or infeasible.
  • Lab-metal seals porosity in welds
  • Fill metal doors, windows, frames and other metal surface defects with Lab-metal.
  • Finish weeping welds and fill tack-welded seams with Lab-metal.
  • Thin Lab-metal with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.
  • Use Lab-metal as a rustproof, water-resistant protective coating on water or fuel storage tanks.
  • Repair metal roofs and all kinds of piping with Lab-metal.
  • Fill cavitation pits in fin assemblies, Francis runners and other propellers with Lab-metal.
  • Repair motor and engine blocks, as well as leaking oil pans with Lab-metal.
  • Repair manifolds and exhaust systems with Hi-Temp Lab-metal, originally formulated for foundries but used for numerous high-temperature repairs in industry.
  • Patch fuel tanks (unable to withstand the heat of welding) with Lab-metal, which is impervious to gasoline.

Bearings / motion control industry:

  • Repair gouged or damaged shafts with Lab-metal prior to replacing new races and bearings.
  • Repair stripped threads with Lab-metal.
  • Build up worn shafts with Lab-metal.
  • Fill over-bored holes with Lab-metal and re-drill and tap.
  • Thin Lab-metal with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.

Industrial:

  • Lab-metal is a proven filler used in metalworking plants since 1950.
  • Lab-metal fills metal doors, windows, frames and other metal surface defects.
  • Repair metal roofs and all kinds of piping with Lab-metal.
  • Repair worn or damaged equipment and machinery with Lab-metal.
  • Repair metal furniture with Lab-metal.
  • Build up worn tracks on industrial equipment with Lab-metal.
  • Patch industrial ovens with Hi-Temp Lab-metal.
  • Patch ducts and vents with Lab-metal.
  • Build up worn shafts with Lab-metal.
  • Fill over-bored holes with Lab-metal and re-drill and tap.
  • Fill holes in metal fabrications, including doorways and metal door seams, with Lab-metal.

Construction & Transportation:

  • Repair mufflers with Hi-Temp Lab-metal.
  • Patch automotive, heavy equipment and machinery fuel tanks with Lab-metal.
  • Repair cracked auto/truck/contractor machinery engine blocks with Lab-metal.
  • Coat and finish damaged metal roofs on train gondola cars, trucks and trailers with Lab-metal.
  • Fill damaged and pitted turbines in power generation plants with Lab-metal.
  • Fill handrail seams and metal banisters with Lab-metal.

Marine:

  • Fill holes in metal masts with Lab-metal when relocating attachments.
  • Patch and finish gouged metal surfaces with Lab-metal.
  • Thin Lab-metal with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.
  • Use Lab-metal as a rustproof, water-resistant protective coating on water or fuel storage tanks.
  • Fill cavitation pits on fin assemblies, Francis runners and other propellers with Lab-metal.
  • Seal leaking seams in aluminum boats with Lab-metal.
  • Repair boat engine blocks with Lab-metal.
  • Repair leaking oil pans with Lab-metal.
  • Repair cracked inboard engine blocks with Lab-metal.
  • Repair manifolds and exhaust systems with Hi-Temp Lab-metal, originally formulated for foundries but used for numerous high-temperature repairs in industry.

Plumbing & Heating (HVACR):

  • Fill pump housings and metal surface defects with Lab-metal.
  • Patch holes in all kinds of piping (even PVC) with Lab-metal.
  • Patch low-pressure steam lines with Lab-metal.
  • Patch ductwork and vents with Lab-metal.
  • Seal leaking radiators and heaters with Lab-metal.
  • Repair cracked boilers with Lab-metal.
  • Repair leaking pipes, water and fuel tanks with Lab-metal.
  • Repair damaged flanges with Lab-metal prior to installation of new gasketing.

Agriculture:

  • Patch farm tractor fuel tanks and worn plow blades with Lab-metal.
  • Repair stripped threads with Lab-metal.
  • Repair water tanks and watering troughs with Lab-metal.
  • Repair cracked tractor engine blocks and oil pans with Lab-metal.
  • Thin Lab-metal with Lab-solvent and brush or spray onto metal surfaces for a rustproof, water-resistant metal finish that can be painted over.
  • Fill seams or dents with Lab-metal.
  • Coat or patch leaks in metal troughs, roofs, gutters and downspouts with Lab-metal.
  • Build up worn shafts with Lab-metal.
  • Fill over-bored holes with Lab-metal and re-drill and tap.
  • Repair holes in irrigation pipes with Lab-metal.

Woodworking:

  • Thin Lab-metal with Lab-solvent and brush or spray onto the substrate for a smooth finish prior to painting.
  • Repair wooden patterns with Lab-metal.
  • Repair wooden boat screw-holes and other stripped threads with Lab-metal.

Paint & Powder Coating:

  • Lab-metal withstands temperatures as high as 425ºF for one-time exposures for no longer than 20 minutes
  • Hi-Temp Lab-metal withstands temperatures greater than 350ºF, up to 1000ºF!
  • Use Lab-metal or Hi-Temp Lab-metal to fill dents in metal parts to be liquid or powder coated.
  • Repair damaged parts or build up worn parts with Lab-metal before painting or powder coating.
  • Use Lab-metal as a protective metallic paint or coating by thinning with Lab-solvent and applying with a paint brush or spray equipment.

Do-It-Yourself ~ Hardware & Home Center:

  • Repair holes in lawn mower housings with Lab-metal.
  • Repair leaking gutters with Lab-metal.
  • Repair metal roofs with Lab-metal.
  • Repair wood stoves with Hi-Temp Lab-metal.
  • Repair PVC irrigation piping, PVC pool water lines and pool pumps with Lab-metal
  • Repair aluminum boats with Lab-metal.
  • Repair rusted tree stands, bird feeders / baths with Lab-metal.
  • Repair incorrectly drilled holes in metal pipes and tubes with Lab-metal.
  • Repair leaking gasoline tanks with Lab-metal.

Post Rating

Comments

There are currently no comments, be the first to post one!

Post Comment

Only registered users may post comments.
ALVIN PRODUCTS
A DIVISION OF DAMPNEY COMPANY
85 PARIS STREET, EVERETT, MA 02149
Phone (800) 537-7023
Fax (617) 389-0484
bodrum escort
bonus veren siteler Yatirimsiz Bonus Yatirimsiz Bonus deneme bonusu veren siteler bonus veren bahis siteleri
erotik film izle
mask boys gangbang xvideos donas de casa jobenessexo
ankara escort
bonus veren siteler
escort alanya
replica watches
www.copeland.club
asyabahis